|
|||
Product overview The blade dryer is a kind of type equipment set inside the stirrer, the wet material under the agitation of the blade, and the heat carrier and good contact with hot surface, dry so as to achieve the purpose of low-speed mixing dryer, structure generally is horizontal, the biaxial or four axis. ◎The blade type dryer is divided into hot air type and transmission type. Hot air type that is through the heat carrier, such as the hot air and drying the material to contact with each other and to dry, heat carrier in the conduction type is not direct contact with by dry material, but hot surface and material contact with each other. Conduction type is not easy contaminated materials, and the advantages of small displacement, high thermal efficiency, the volume is relatively small, is helpful to save energy and prevent the air pollution. ◎Equipment is compact, cover an area of an area small, high heat conduction coefficient, heat efficiency, generally can reach 80% 90%, is a energy-saving equipment. ◎Equipment of low speed, the granular and flaky materials crushing is small. ◎Wide adaptability for the material, large elasticity of operation, stay time several minutes to several hours, material is adjustable. ◎The accessory equipment is simple, less investment, low operation cost. ◎Multi-usage, can make drying, cooling, gas recovery, reaction heat (sterilization) process operations.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The installation structure Technical parameters
|