 |
 |
| |
|
|
|||
DetailProduct features ：
Hot air through the material layer and material the reverse flow for many times, make the heat exchange full, high thermal efficiency.
Compact structure, cover an area of an area small.
Material residence time can be adjusted within the bed, easy to operate.
Material along the helix bed from bottom to top a circular motion at the same time, its also jump, thus increasing the material more than hot air contact, enhancing the drying effect.
Continuous front-rear suitable for assembly line, and easy to achieve "GMP" standards, can replace the traditional box-type drying.
On the surface of the material and shape the basic no damage, not only guarantees the roundness of the pills, and greatly reduce the breakage rate of pills.
The working principle of ：
Wet material has entered the screw inside the bed top loading port, the circumferential vibration force and under the action of gravity, material along the helix bed from top to bottom as jumping movement, until the lowest emerge; At the same time, the clean hot air by the screw to enter at the bottom of the bed, and distribution of the materials are in bed after sufficient heat transfer and mass transfer, of the top row of wet mouth eduction. So that the wet material to achieve the purpose of drying.
Technical parameters ：
|
model |
unit |
LZG-1.0 |
LZG-1.2 |
LZG-1.4 |
LZG-1.6 |
LZG-1.8 |
|
diameter |
mm |
1000 |
1200 |
1400 |
1600 |
1800 |
|
Vibration motor power |
kw |
2×0.75 |
2×0.75 |
2×1.5 |
2×1.5 |
2×2.2 |
|
Overall dimensions |
m |
1.2×1.2×2.7 |
1.4×1.4×2.7 |
1.6×1.6×3.3 |
1.8×1.8×3.3 |
2.0×2.0×3.3 |
|
The weight of the |
kg |
1400 |
1680 |
2800 |
3100 |
3800 |
|
Production capacity |
kg/h |
80～120 |
120～200 |
200～280 |
280～350 |
350～450 |
|
Inlet air temperature |
℃ |
60～200 |
60～200 |
60～200 |
60～200 |
60～200 |
|
Air volume |
m3/h |
1487 |
2380 |
3721 |
4462 |
5930 |
|
The fan power |
kw |
5.5 |
7.5 |
15 |
18.5 |
22 |
